Solid Ground Spiral Pointed Taps
Material:H.S.S
COARSE THREAT
Metric System:mm
|
Thread specification d | Pitch p | Nominal Diameter d | Thread Length l | Overall Length L | Shank Diameter d1 | Size of Square a |
| M3 | 0.5 | 3 | 15 | 48 | 3.15 | 2.5 |
| M4 | 0.7 | 4 | 17 | 53 | 4.0 | 3.15 |
| M5 | 0.8 | 5 | 20.5 | 58 | 5.0 | 4 |
| M6 | 1.0 | 6 | 24.5 | 66 | 6.3 | 5 |
FINE THREAT
Metric System:mm
| Thread specification d | Pitch p | Nominal Diameter d | Thread Length l | Overall Length L | Shank Diameter d1 | Size of Square a |
| M4*0.5 | 0.5 | 4 | 17 | 53 | 4.0 | 3.15 |
| M5*0.5 | 0.5 | 5 | 20.5 | 58 | 5.0 | 4 |
| M6*0.5 | 0.5 | 6 | 24.5 | 66 | 6.3 | 5 |
COARSE THREAT
Metric System:mm
| Thread specification d | Pitch p | Nominal Diameter d | Thread Length l | Overall Length L | Shank Diameter d1 | Size of Square a |
| M6 | 1.0 | 6 | 19 | 66 | 4.5 | 3.55 |
| M7 | 1.0 | 7 | 19 | 66 | 5.6 | 4.5 |
| M8 | 1.25 | 8 | 22 | 72 | 6.3 | 5 |
| M9 | 1.25 | 9 | 22 | 72 | 7.1 | 5.6 |
| M10 | 1.5 | 10 | 24 | 80 | 8.0 | 6.3 |
| M11 | 1.5 | 11 | 25 | 85 | 8.0 | 6.3 |
| M12 | 1.75 | 12 | 29 | 89 | 9.0 | 7.1 |
| M14 | 2.0 | 14 | 30 | 95 | 11.2 | 9 |
| M16 | 2.0 | 16 | 32 | 102 | 12.5 | 10 |
| M18 | 2.5 | 18 | 37 | 112 | 14 | 11.2 |
| M20 | 2.5 | 20 | 37 | 112 | 14 | 11.2 |
FINE THREAT
Metric System:mm
| Thread specification d | Pitch p | Nominal Diameter d | Thread Length l | Overall Length L | Shank Diameter d1 | Size of Square a |
| M8 *0.75 | 0.75 | 8 | 19 | 66 | 6.3 | 5 |
| M8 *1.0 | 1.0 | 69 |
| M9 *0.75 | 0.75 | 9 | 66 | 7.1 | 5.6 |
| M9 *1.0 | 1.0 | 69 |
| M10*0.75 | 0.75 | 10 | 20 | 73 | 8 | 6.3 |
| M10*1.0 | 1.0 | 76 |
| M10*1.25 | 1.25 |
| M11*0.75 | 0.75 | 11 | 22 | 80 |
| M11*1.0 | 1.0 | |
| M12*1.0 | 12 | 9 | 7.1 |
| M12*1.25 | 1.25 | 24 | 84 |
| M12*1.5 | 1.5 | 29 | 89 |
| M14*1.0 | 1.0 | 14 | 22 | 87 | 11.2 | 9 |
| M14*1.25 | 1.25 | 25 | 90 |
| M14*1.5 | 1.5 | 30 | 95 |
| M15*1.5 | 15 |
| M16*1.0 | 1.0 | 16 | 22 | 92 | 12.5 | 10 |
| M16*1.5 | 1.5 | 32 | 102 |
| M17*1.5 | 17 |
| M18*1.0 | 1.0 | 18 | 22 | 97 | 14 | 11.2 |
| M18*1.5 | 1.5 | 29 | 104 |
| M18*2.0 | 2.0 | 37 | 112 |
| M20*1.0 | 1.0 | 20 | 22 | 102 |
| M20*1.5 | 1.5 | 20 | 29 | 104 |
| M20*2.0 | 2.0 | 20 | 37 | 112 |
Add:774 Songbin Road, Shanghai, 200940
Fax:0086-21-56719140
Tel :0086-21-56719141, 56719142, 56666357
|
: succ@sh163.net