Circular Screwing Dies
Material: Alloy Tool Steel
Metric System:mm
Coarse thread
| Thread specification d | Pitch p | Outside Diameter D | Thicknees B |
| M1 | 0.25 | 16 | 5 |
| M1.1 |
| M1.2 |
| M1.4 | 0.30 |
| M1.6 | 0.35 |
| M1.8 | 0.35 |
| M2 | 0.40 |
| M2.2 | 0.45 |
| M2.5 | 0.45 |
| M3 | 0.50 | 20 |
| M3.5 | 0.60 |
| M4 | 0.70 |
| M4.5 | 0.75 | 7 |
| M5 | 0.80 |
| M6 | 1.0 |
| M7 | 1.0 | 25 | 9 |
| M8 | 1.25 |
| M9 | 1.25 |
| M10 | 1.5 | 30 | 11 |
| M11 | 1.5 |
| M12 | 1.75 | 38 | 14 |
| M14 | 2.0 |
| M16 | 2.0 |
| M20 | 2.5 | 45 | 18 |
| M22 |
| M18 | 55 | 22 |
| M24 | 3.0 | 65 |
| M27 | 25 |
Fine thread
Metric System:mm
| Thread specification d | Pitch p | Outside Diameter D | Thicknees B |
| M1*0.2 | 0.2 | 16 | 5 |
| M1.1*0.2 |
| M1.2 *0.2 |
| M1.4 *0.2 |
| M1.6 *0.2 |
| M1.8 *0.2 |
| M2 *0.25 | 0.25 |
| M2.2 *0.25 |
| M2.5 *0.35 | 0.35 |
| M3 *0.35 | 20 |
| M4 *0.5 | 0.5 |
| M4.5*0.35 | 0.35 |
| M4.5*0.5 | 0.5 |
| M5 *0.5 | 0.5 |
| M5.5*0.5 | 0.5 |
| M6 *0.75 | 0.75 | 7 |
| M7 *.0.75 | 25 | 9 |
| M8 *0.75 |
| M8 *1.0 | 1.0 |
| M9 *0.75 | 0.75 |
| M9 *1.0 | 1.0 |
| M10*0.75 | 0.75 | 30 | 11 |
| M10*1.0 | 1.0 |
| M10*1.25 | 1.25 |
| M12*1.0 | 1.0 | 38 | 10 |
| M12*1.25 | 1.25 |
| M12*1.5 | 1.5 |
| M14*1.0 | 1.0 |
| M14*1.25 | 1.25 |
| M14*1.5 | 1.5 |
| M16*1.0 | 1.0 | 45 | 14 |
| M16*1.5 | 1.5 |
| M18*1.0 | 1.0 |
| M18*1.5 | 1.5 |
| M18*2.0 | 2.0 |
| M20*1.0 | 1.0 |
| M20*1.5 | 1.5 |
| M20*2.0 | 2.0 |
| M24*1.0 | 1.0 | 56 | 16 |
| M24*1.5 | 1.5 |
| M24*2.0 | 2.0 |
| M27*1.0 | 1.0 | 65 | 18 |
| M27*2.0 | 2.0 |
british system:inch
| Thread specification d | T.P.1 p | Outside Diameter D | Thickness B |
| 1/8 | 40 | 16 | 4 |
| 3/16 | 24 | 20 | 7 |
| 1/4 | 20 |
| 5/16 | 18 | 25 | 9 |
| 3/8 | 16 | 30 | 11 |
| 7/16 | 14 |
| 1/2 | 12 | 38 | 14 |
| 9/16 |
| 5/8 | 11 |
| 3/4 | 10 | 45 | 18 |
| 7/8 | 9 |
| 1" | 8 | 22 |
Notes: Dies with One Opened Side can also be supplied.
Add:774 Songbin Road, Shanghai, 200940
Fax:0086-21-56719140
Tel :0086-21-56719141, 56719142, 56666357
|
: succ@sh163.net